Ethernet Gateway configuration

Efento Gateways are network-connected devices that receive data from nearby Efento Bluetooth Low Energy sensors and transmit it to the Efento Cloud.

You can configure your Efento Gateway using one of the following methods: follow the instructions for configuration via the mobile application, use a web browser, or watch the instructional video demonstrating gateway configuration through a web browser.

Before you start

The Efento Gateway relies on your network infrastructure to communicate with Efento Cloud. Ensure that there are no network restrictions that could block this communication. If a firewall is in use, make sure that connections are allowed to the following domains and ports:

• api.efento.io, gwm.efento.io, update.efento.io on ports 443 and 80

• pool.ntp.org on port 123

Failure to allow these connections will prevent the gateway from sending data to Efento Cloud.

Efento mobile application

Configuration of Efento Gateways with mobile application is the quickest and easiest way of the device configuration.

1

Connect the antenna

Before you proceed with gateway configuration, make sure the Bluetooth antena is connected

2

Power up the gateway

Connect the gateway to the power source. The Ethernet Gateway can be powered by either a USB power supply (5V, 1A) or a PoE (802.3 af) connection. The Gateway powers on automatically when connected to the power source.

Power Supply Requirements

Use only approved power sources to power the Efento Gateways.

• When using a USB power supply, ensure it provides a stable 5V output with a minimum current of 1A.

• When using Power over Ethernet (PoE), connect the gateway only to network equipment compliant with the IEEE 802.3 af PoE standard.

Using an improper charger (e.g., one with an output below 1A) or non-standard PoE equipment may result in:

• Insufficient power delivery, leading to unstable operation or unexpected shutdowns,

• Permanent damage to the gateway’s internal components,

• Loss of communication with connected loggers.

Failure to follow these guidelines may void the device warranty and cause equipment malfunction.

3

Run the mobile application

Download Efento mobile application for Android or for iOS, open it and login to your Efento Cloud account. If you don't have an account yet, please create one before proceeding.

4

Follow the instructions on the screen

The gateway provisioning process in the mobile application has been designed for maximum simplicity and ease of use. Follow the on-screen instructions carefully to complete the gateway configuration.

Web browser

1

Connect the antenna

Before you proceed with gateway configuration, make sure the Bluetooth antena is connected

2

Power up the gateway

To set up your Efento Gateway through a web browser, first connect the gateway to a power source using a USB cable. The device will automatically power up.

3

Connect to the gateway via web browser

Then, use an Ethernet cable to connect the gateway to your computer. Finally, adjust the settings of the network card on your computer that is connected to the gateway:

• IP address: 192.168.120.0/24 (e.g. 192.168.120.2),

• Subnet mask 255.255.255.0.

Access the Efento Gateway by opening your internet browser and navigating to 192.168.120.89. This is the default gateway address. Log in using the default username and password printed on the label at the bottom of the device.

4

Configure the network settings

To configure your Efento Gateway for internet access, go to the Settings > Network section and input all the required network settings. This includes the IP address of both the Efento Gateway and the network gateway, the subnet mask, and the DNS address. Click 'Save' to apply these changes.

The Efento Gateway also supports DHCP. If you enable DHCP, the network configuration will be downloaded automatically from your router (ensure that the DHCP is enabled on the router).

5

Set the Organisation token

An Organization token, a unique number assigned to your Organization, is used to assign a gateway to your Organization. By entering this token into the Efento Gateway, measurement data from all sensors within range will be automatically sent to your Organization's Efento Cloud account. This allows data from multiple Efento Gateways, even those in distant locations, to be assigned to a single Organization, enabling measurement data from numerous facilities to be sent to your Organization's account.

To locate your Organization token, log into your Efento Cloud account. Then, select the settings icon (gearwheel) on the left side menu, and click on Organization settings.

To automatically transmit measurements from all sensors within range to the Efento Cloud platform, input the Organization token into the 'Token' field on the Efento Gateway configuration page, found under Settings > Server.

6

Place the gateway in its location

After completing the configuration, disconnect the Efento Gateway from your computer and connect it to the network using an Ethernet cable. If the network switch, router, or injector supports Power over Ethernet (PoE) 802.3af, the Ethernet cable will provide both power and network connectivity. If PoE is not available, connect the gateway to a 5V, 1A USB power supply in addition to the Ethernet cable.

Once the necessary connections are made, place the gateway in its final installation location.

Ensuring Good Signal Conditions

To ensure optimal Bluetooth communication performance, consider the following recommendations when selecting the installation site for the gateway:

• Place the gateway in an open area, at least 1 meter above the ground.

• Avoid installing the gateway close to corners, or large metal surfaces that may block or reflect Bluetooth signals.

• Keep the gateway away from sources of electromagnetic interference such as Wi-Fi routers or industrial equipment.

• Avoid placing the gateway inside cabinets, enclosures, or behind objects that may reduce signal strength.

• If multiple gateways are used, maintain sufficient spacing between them to minimize mutual interference.

• After installation, verify Bluetooth signal quality and communication stability with all connected devices to confirm proper operation.

7

Check communication with Efento Cloud

Reconnect to the gateway using the new IP address. If the gateway has been properly configured, in the "Status" tab it will show the date and time of the last server connection, as well as Network status and Server status information.

Movie: Bluetooth - Ethernet Gateway configuration